SPLIT SLEEVE CLAMP

Cuts, grooves, gouges, dents, burns of the arc, laminating, welding of the bad girth and fractures inside and outside the gaps.

The highest-grade authorities in the world approve split sleeve clamp material which provides reli sleeve. Harm to the split sleeve clamp is protected by elastomer seals of the highest quality required for the protection of pipeline fluids. During construction, split sleeve clamp can also be welded to ensure a lasting fix. It should be fully seal-welded, with the pipeline in service.
ASTM A283 GRADES : Grade A , Grade B , Grade C , Grade D.
ASTM A285 GRADES : Grade A , Grade B , Grade C.
ASTM A387 GRADES : Grade A , Grade B , Grade C , Grade D.
Read More

Reli Pipes makes split sleeve clamp from material made from high-quality cast iron with bell-and-spigot joints. We provide high-quality Pipeline Maintenance Clamps to provide the best customer service, without complaints. It makes our branch know-how & credibility paramount.

• Default Reli Sleeve Clamps are fitted with a tight elastomeric seal which is produced using Buna-Nitrile or Viton. The fixing load in these applications is 
• Performed by shock tensioning guide studs (split sleeve plane). 
• All Reli Sleeve’s Clamps are sifted through with an outside weight test office that gets on the joint decency preceding affirming. 
• Likewise, the twin seal program is available to permit seal testing to be done during the foundation. 
• Reli Sleeve Clamps might be required to fix applications outside of and sub-sea. 
• It is conceivable to make organized game arrangements to utilize metal graphite composite seal gave in all Reli Sleeve material. 
• Graphite-based obsession ensures a seal that is misleadingly made sure about, high temperature, high weight, and won’t ruin in influential or outrageous conditions. 
• Our submitted organizing social affair will offer a customized connector game-plan.

• ANSI pressure classes 300, 400, 600, 900 and 1500. 
• The approach is needy upon: ASME Sec. VIII, API 6H , ANSI B31.4, B31.8 and Split Sleeve Software 3S 
• Approach control and stress evaluation with a kept part assembling 
• Body materials: A216 WCB, A216 WCC, A352 LCC, A516 Gr.70 (Suitable for normally hurting affiliations) 
• Stud material: A193 Gr. B7 Nut material: A 194 Gr. 2H 
• Covering: Yellow Epoxy Polyamide, standard or Marine epoxy 
• The most basic bore NBR or VITON elastomer seal clearly amazing with the line fluid and encompassing temperature will be brought into the split sleeves 
• NBR temperature extend is from – 20 C to + 80 ̊ C̊ 
• HNBR temperature run is from – 20 C to + 150 ̊ C̊ 
• VITON temperature extend is from – 20 C to + 200 ̊ C 
• Gaskets are replaceable with no astounding instruments 
• Strengthen rings can be presented upon clients request 
• The twofold Row Sealing (DRS) plan is in like manner open. This phenomenal game-plan is consistently sensible for where conceivable spillage is a great deal of costly or hazardous, for instance, vaporous affiliations and toward the ocean applications

• Size: Regular Replacement Clamps: 4’–52 “# 1500 # appropriate for temporary carbon steel.
• Size: Engineered Repair Clamps: 1/2″–52″>2500 # suitable for temporary or permanent installations in carbon steel, stainless steel, and super duplex.

Safety

The clamps are fully compensatory pressure vessels, measured hydrostatically at 1.3 times the overall working pressure (as provided for in Section VIII Div.1 of ASME’s UG-99)

All Clamps come with a 1 “NPT vent port

Design Criteria and Industry Standards

Both broken sleeves shall be checked in compliance with API Requirements 6H, “End Closures, Connectors, and Swivels Requirements,” ASME BOILER AND PRESSURE VESSEL CODE, Section VIII; and, where applicable, ANSI Standards B-31.3, B31.4, & B31.8. Credit: Law EN 10204 3.1

Ease of Installation and Maintenance

Both broken sleeves are designed for assembly using most of the equipment available and can be quickly fixed from the field, including full seal replacement.

Economy

Split Sleeve Clamp have been designed to use state-of-the-art technology to refine construction methods and components, resulting in a lighter weight, lower bending actions, and more cost effective.

A split sleeve type is intended for use in the hydrocarbon-bearing sulfide (H2S) process.

The body substance matches NACE MR0175 in poor condition

We will deliver Split Sleeve Clamp in any size and configured according to customer’s preferences & order.

Inspection of Split Sleeve Clamp

Each of the Bolted Sleeve Clamp had been inspected carefully before delivery and checked for defects. The shipment is being scrupulously checked and certified for safety and durability. Our company experts check the whole split sleeve clamp package for the first time before we give it to our customers. Components that do not meet our strict requirements will be turned down and not delivered immediately.

Not Injurious (NDT):

100% Stiffener to Shell Particle Magnetic Testing (MPI)

Swelter (nickname in French)

100% Optical inspection of welded ventilated attachments

Welded character softens at 100% MPI

Hydrotest as provided for in Clause UG-99, Section VIII Div.1 of ASME

With the height , width and durability of the materials used to make the reli case split sleeve clamp, produced in India and beyond, each split sleeve clamp is called. We supply a shipment of this in India as well as abroad. Reli Sleeve avails it’s products all across India and various countries abroad as well.