CARBON STEEL REPAIR CLAMPS

Cuts, grooves, gouges, dents, spark burning, laminating, poor girth welding, and cracks inside and outside of the holes.

Carbon Steel Repair Clamps material provided by Reli sleeve is certified by the world’s highest grade authorities. Any damage to carbon steel repair clamps is secured by the best quality elastomer seals needed to secure pipeline fluids. Carbon Steel Repair Clamps may also be welded during construction to ensure a lasting fix. With the pipeline in operation, it will be completely seal-welded.
ASTM A283 GRADES : Grade A , Grade B , Grade C , Grade D.
ASTM A285 GRADES : Grade A , Grade B , Grade C.
ASTM A387 GRADES : Grade A , Grade B , Grade C , Grade D.
Read More

Reli Pipes makes carbon steel repair clamps from a material of bell-and-spigot joints made from high-quality cast iron. We have Pipeline Maintenance Clamps of good quality and offer the highest customer experience, with no complaints. We are the subject matter expert having great reputation in the market.

• Custom Reli Sleeve Clamps are built with a tight elastomeric seal that is made with Buna-Nitrile or Viton. In such applications the repair load is
• Performed by guidance studs to stress shock (split sleeve plane).
• Each of Reli Sleeve’s Clamps are sifted over with an official weight check office that claims the aforementioned mutual dignity.
• Similarly, the twin seal system is available to allow seal testing during base.
• Reli Sleeve Clamps can need to fine-tune applications outside and subsea.
• In all material from Reli Shell, it is conceivable to make structured game arrangements to use metal graphite composite seal given in.
• Obsession based on graphite guarantees a bond that is misleadingly told of, high temperature, high weight, and does not wreck under powerful or ludicrous circumstances.
• Our proposed social affair planning will deliver a personalized game-plan connector.

• ANSI pressure classes 300, 400, 600, 900, and 1500.
• The methodology is penniless upon ASME Sec. VIII, API 6H, ANSI B31.4, B31.8, and Split Sleeve Software 3S
• Approach control and stress assessment with a kept part collecting
• Body materials: A216 WCB, A216 WCC, A352 LCC, A516 Gr.70 (Suitable for ordinarily harming affiliations)
• Stud material: A193 Gr. B7 Nut material: A 194 Gr. 2H
• Covering: Yellow Epoxy Polyamide, standard or Marine epoxy
• The most fundamental bore NBR or VITON elastomer seal unmistakably stunning with the line liquid and incorporating temperature will be brought into the split sleeves
• NBR temperature broaden is from – 20 C to + 80 ̊ C̊
• HNBR temperature run is from – 20 C to + 150 ̊ C̊
• VITON temperature expand is from – 20 C to + 200 ̊ C
• Gaskets are replaceable with no shocking instruments
• Reinforce rings can be introduced upon customers demand
• The twofold Row Sealing (DRS) plan is in like way open. This extraordinary blueprint is reliably reasonable for where possible spillage is a lot exorbitant or unsafe, for example, vaporous affiliations and toward the sea applications

• Size: Regular Replacement Clamps: 4’–52 “# 1500 # appropriate for temporary carbon steel.
• Size: Engineered Repair Clamps: 1/2″–52″>2500 # suitable for temporary or permanent installations in carbon steel, stainless steel, and super duplex.

Safety

The clamps are totally compensatory pressure tubes, measured hydrostatically at 1.3 times the overall working pressure (as provided for in ASME’s UG-99 Section VIII Div.1)

Both Clamps come with a vent port of 1 “NPT

Design Criteria and Industry Standards

Both torn sleeves shall be checked in compliance with API Specifications 6H, “End Seals, Ties and Swivels Specifications,” ASME BOILER AND PRESSURE VESSEL Specification, Section VIII; and ANSI Standards B-31.3, B31.4, & B31.8, where appropriate. Credit: Statute EN 10204 3.1

Ease of Installation and Maintenance

Both broken sleeves are designed for installation using much of the available hardware and can be patched from the field easily, including complete seal repair.

Economy

Carbon Steel Repair Clamps have been designed to use state-of-the-art technologies to optimize building processes and materials, resulting in a lighter weight, lower bending behavior, and better cost-effectiveness.

A split sleeve form is intended for use in the sulfide-bearing hydrocarbon (H2S) process.

The body material suits in bad condition with NACE MR0175

We can supply carbon steel repair clamps in every dimension, tailored to customer requirements & order.

We can provide carbon steel repair clamps in every dimension, tailored to each customer’s requirements & orders.

Inspection of CARBON STEEL REPAIR CLAMPSs

Until shipping, each of the carbon steel repair clamps is carefully inspected and tested for defects. The shipping is scrupulously tested and verified for its safety and durability. Every carbon steel repair clamps package is first checked by our company experts before delivering to the clients. Components that do not meet our safety and business standards will be immediately turned down and not delivered.

Not Injurious (NDT):

100% Stiffener to Shell Particle Magnetic Testing (MPI)

Swelter (nickname in French)

100% Optical inspection of welded ventilated attachments

Welded character softens at 100% MPI

Hydrotest as provided for in Clause UG-99, Section VIII Div.1 of ASME

Every carbon steel repair clamp is labeled by its height, width, and toughness of the materials used to make the Reli Case carbon steel repair clamps, manufactured in India and beyond. Reli Sleeve ships its products all across India and various countries across the globe.