SINGLE BAND
Pipe Dia. DN15 – DN 100
Length mm – 100, 150, 200.
SINGLE BAND
Pipe Dia. DN40 – DN 350
Length mm – 100 to 300 (50 gap), 300 to 600, (100 gap).
DOUBLE BAND
Pipe Dia. DN80 – DN 600
Length mm – 200 to 300 (50 gap), 300 to 600, (100 gap).
Repair Clamps used for Pipe Material : Aluminum, CPVC Plastic, Iron, PVC Plastic, Stainless Steel, Steel.
Clamps that meet NSF/ANSI 61 are safe for use with drinking water systems.
Low-Pressure Pipe Repair Clamps –
Used to attend leaky and serious condition by permanently Repairing pinholes and cracks in low-pressure applications without having to disassemble the pipeline layout, for above ground and Underground application.
| Clamp Body & Finger | Pre-rolled / Tensioned material SS – A2 (AISI 304) or SS A4 (AISI 316L – Optional). |
| Gasket / Liner / Seal | Water and gas: Buna-N / NBR according to EN 682 (-10°C up to +70°C).
Potable water: EPDM according to EN 681-1 (-10°C upto +55°C). EPDM gaskets : Steam and Other high temperature applications. |
| Lifter bar | U shaped. |
| Bridge & Side plate | SS 304 / 304L, Bridge & Spanner plate is Vulcanized into the rubber gasket. |
| Bolts, nuts & washers | SS A2 (AISI 304) or SS A4 (AISI 316 – Optional for body made of SS AISI 316L). Bolts are PTFE coated. |
| Range | For pipe O.D 15 mm up to1000 mm.
* For details please contact the supplier. |
| Length | 75 mm – 750 mm. * For details please contact the supplier,
Minimum of 1.5” extended on both sides each (long enough to cover the damaged area). |
| Thread | According ISO / DIN (ISO R7 / DIN 2999 / EN 10226) |
| Working pressure | WATER – Upto 16 bar (DN 15 TO DN 150), Upto 10 bar (DN 175 TO DN 450) and Upto 6 bar Above DN 500.
GAS – Up to 8 bar. |