Galvanized Steel Wall Sleeve are made of welded or seamless steel pipes or steel with a welded steel water stop, Galvanize epoxy coating. Other corrosion protection measures are also available upon request. The pipe wall sleeves are used to create a hole penetration in a concrete wall. They are Galvanized to make them corrosion-resistant. They are provided with a water stop ring. Our Galvanizes wall penetration sleeve provides corrosion-resistant sealing surface for pipes penetrating wall, floors, foundation or any concrete barriers. The steel pipe sleeves are used in gas applications, power plants, potable & water waste, oil platform, jet fuel transfer, refineries, general mechanical engineering, pipelines and chemical and industrial plants etc. These wall sleeves are designed to fit wall thickness as well as ductwork size and common pipe.
To prevent the moisture from penetrating the wall and for better stability the galvanized wall sleeves are included with a 2” water-stop. They are available many sizes. The steels are available from 2” to 30” diameter size at 12’ length. You can also get them custom made with different length and size on request. The galvanized wall sleeves are more suitable for bricking and concreting. The standard length they are supplied is 400 mm. They can be easily trimmed to the wall thickness on site.
Most of the time the wall damage is often caused by vibration of utility piping or pipe repair, but these problems can be avoided by using our wall sleeves. With our complete sealing system which includes wall sleeves with water stop and galvanized epoxy coating wall penetration seals. These products provide you with the necessary seal for your piping system. If you’re facing any sealing problems like a seals that’s not matched by the core drilled holes then our sleeve walls are the answer to your problem. Our sleeve walls are available in both carbon steel and pvc standard wall sleeves. They are both available in 12” length with 2” water stop with the standard diameters from 2”to “24. They are stocked and ready for shipment. You can also get them custom made on special request. Blast and gas protection shelter walls are provided with wall sleeves for incoming and outgoing utilities to attain protection level in terms of gas tightness, durability and pressure. Galvanized steel wall sleeves are the best method to create a perfect hole in the wall when penetrating copper, cast iron, steel or plastic pipes through ceilings, walls or floors. Galvanized steel wall sleeves are also the best option that provides best condition for a seal to work.

Wall damage, often caused by vibration of utility piping or pipe repair, can easily be avoided using RELI’s wall sleeves. Providing a seal that cannot be matched by core drilled holes, our wall sleeves are the answer to your sealing problems. RELI’s wall sleeves have been specifically designed to pair with RELI’s wall sleeves Wall Penetration Seals for a leak resistant sealing system.

RELI WALL SLEEVE offers both Carbon Steel and PVC standard wall sleeves in 12” lengths with 2” water stops. Standard diameters, 2” through 24”, are stocked and ready for immediate shipment. Custom diameters and lengths are also available upon request.

RELI WALL SLEEVE are available in stainless steel and carbon steel with our new Infinity wall sleeve manufactured in HDPE. The standard length is 12”; longer and shorter lengths are available. Steel wall sleeves are available in sizes from 2” to 120” diameter.

When penetrating steel, cast iron, copper or plastic pipes through walls, ceilings or floors,  RELI GALVANIZED wall sleeves are the best method to create a perfect hole inside the wall and provide best conditions for a seal to work. Wherever the modular seal is used to seal the annular space between the carrier pipe and the wall penetration, it makes sense to use RELI-SLEEVE wall sleeve. RELI GALVANIZED wall sleeves are made of welded or seamless steel pipes. They are galvanized to protect them against corrosion. Other corrosion protection measures are available upon request (e.g. electrostatic powder coating). The standard RELI-SLEEVE is supplied with a welded-on anchor flange. It acts as an annular water-stop plate which provides a 100% seal around the outer diameter and also serves as a wall anchor.

• One Man Job
• Fast Turn-around
•  Shall be provided free of welding slag.
• Sizes through 10” (25.4 cm) shall be Schedule 40 Steel Pipe or standard wall thickness.
• Sizes 12” (30.48 cm) and larger shall have a .375” (0.95 cm) or standard wall thickness.

WSG Galvanized Steel Wall Sleeve Specification Provide WSG Galvanized Steel sleeves for all pipes passing through concrete or masonry structures. The WSG Sleeves shall be provided free of welding slag. WSG Steel Sleeve sizes though 10” shall be Schedule 40 Steel Pipe or standard wall thickness. WSG Steel Sleeve sizes 12” and larger shall have a .375” or standard wall thickness. WSG Sleeves through wall shall be cast in place and the pipe shall be installed centered in sleeve. The 2” collar, (water stop) shall be the same type of steel as the WSG sleeve. The collar shall be welded all around on both sides to the sleeve at the point on the sleeve that positions it at the mid-point of the structural wall when the sleeve is in place. Best Digital Marketing courses in Navi Mumbai Best Digital Marketing courses in Mumbai The WSG Steel Sleeve w/water-stop shall be galvanized inside and outside.