LEAK REPAIR CLAMP

Cuts, grooves, gouges, dents, fire eruption, laminating, welding inside and outside of cracks with poor girths and holes.

Leak Repair Clamp material that supplies reli sleeve is accredited by the highest-grade authorities around the world. The leak repair clamp sustains damage from elastomer seals of the highest consistency used to secure pipeline fluids. During deployment, repair clamps can also be welded to ensure a lasting fix. It must be completely seal-welded, with the piping in place.
ASTM A283 GRADES : Grade A , Grade B , Grade C , Grade D.
ASTM A285 GRADES : Grade A , Grade B , Grade C.
ASTM A387 GRADES : Grade A , Grade B , Grade C , Grade D.
Read More

Reli Pipes makes leak repair clamps from bell-and-spigot joints made from high-quality cast iron parts. We have excellent quality Pipeline Maintenance Clamps and deliver the best customer service, with no complaints. This makes our division’s Know-how & Reputation key.

• Custom Reli Sleeve Clamps are collected using a solid elastomeric seal made of viton or Buna-Nitrile. The heap for repairs is done with direct studs to pressure stun (split sleeve plane) for these executions.
• Each of Reli Sleeve’s Clamps is filtered over with an official weight check office that guarantees the mutual nobility already listed.
• The Twin Fixing Gadget is also accessible in the institution for seal testing.
• Reli Sleeve Clamps can need to tweak applications outside of and subsea.
• Using of metal graphite composite seal given in is possible to render stabilized game plans in all material from Reli Shell.
• Our proposed get-togethers arrangement will convey the approach with a custom connector.
• Obsession based on graphite retains a bond that is misleadingly told, high temperature, heavyweight and does not demolish under solid or ludicrous circumstances.

• ANSI pressure classes 300, 400, 600, 900, and 1500. 
• The strategy is poor upon ASME Sec. VIII, API 6H, ANSI B31.4, B31.8, and Split Sleeve Software 3S 
• Approach control and stress evaluation with a kept part gathering 
• Body materials: A216 WCB, A216 WCC, A352 LCC, A516 Gr.70 (Suitable for usually hurting affiliations) 
• Stud material: A193 Gr. B7 Nut material: A 194 Gr. 2H 
• Covering: Yellow Epoxy Polyamide, standard or Marine epoxy 
• The most fundamental bore NBR or VITON elastomer seal indisputably amazing with the line fluid and including temperature will be brought into the split sleeves 
• NBR temperature widen is from – 20 C to + 80 ̊ C̊ 
• HNBR temperature run is from – 20 C to + 150 ̊ C̊ 
• VITON temperature extend is from – 20 C to + 200 ̊ C 
• Gaskets are replaceable with no dumbfounding instruments 
• Strengthen rings can be presented upon clients request 
• The twofold Row Sealing (DRS) plan is in like way open. This uncommon methodology is dependably sensible for where conceivable spillage is a great deal of extravagant or dangerous, for instance, vaporous affiliations and toward the ocean applications

Size: Standard replacement clamps: 4’–52 “# 1500 # Acceptable temporary carbon steel.

Size: Engineered Replacement Clamps: 1/2″–52″>2500 # ideal for installs of temporary or permanent carbon steel , stainless steel and super duplex.

Safety

The clamps are completely compensatory pressure strings, measured hydrostatically at 1.3 times the total working pressure (as provided for in Section VIII Div.1 of ASME’s UG-99)

Both clamps come with a 1 “NPT vent port

Design Criteria and Industry Standards

In compliance with API Specifications 6H, ASME BOILER AND PRESSURE VESSEL Design, Section VIII, and, where applicable, ANSI Standards B-31.3, B31.4, & B31.8; Credit: EN 10204 3.1 Statute, all broken sleeves shall be reviewed.

Ease of Installation and Maintenance

Both torn sleeves are designed to be assembled using most of the available equipment and can be easily patched from the field including complete seal repair.

Economy

Leak Repair Clamp was designed to use state-of-the-art technology to automate production processes and components, resulting in a lighter weight, lower bending behavior, and improved cost-effectiveness.

A split sleeve type is intended for use in the hydrocarbon-bearing sulfide (H2S) process.

The body structure is in poor condition and blends in with NACE MR0175

We are able to deliver leak repair clamps in all lengths, customized to consumer needs & orders.

Inspection of Leak Repair Clamp

Each of the leak repair clamps had been carefully tested and inspected for defects until shipment. The shipment is being scrupulously tested and certified to be reliable and secure. Our company professionals test the entire leak repair clamp package first before we send it to our customers. Components that do not meet our stringent specifications are refused and are not automatically shipped.

Not Worrying (NDT):

Magnetic Particle Inspection (MPI) 100% Stiffener to Shell

Swelter (in French: nickname)

100% Visual testing of the welded ventilated fittings

Welded character softens at MPI 100%

Hydrotest as provided for in Section VIII Div.1 of Clause UG-99 of the ASME

The height, width and strength of the materials used to make the reli case repair clamps produced in India and beyond are referred to for each repair clamps. We have stock of those in India as well as abroad. Reli Sleeve avails it’s products all across India and various countries abroad as well.