PIPE REPAIR CLAMP

Cuts, grooves, gouges, dents, arc burns, laminating, bad girth welds, and fractures inside and outside of gaps.

Pipe Repair Clamp material provided by Reli Sleeve is approved by the highest-grade authorities in the world. Damage to the Pipe Repair Clamp is secured through the best quality elastomer seals used for the safety of pipeline fluids. Pipe Repair Clamp can also be welded during installation to ensure a permanent repair. With the pipeline in operation, it could be completely seal-welded.
ASTM A283 GRADES : Grade A , Grade B , Grade C , Grade D.
ASTM A285 GRADES : Grade A , Grade B , Grade C.
ASTM A387 GRADES : Grade A , Grade B , Grade C , Grade D.
Read More

Reli Pipes makes pipeline repair clamps with bell-and-spigot joints from material made from high-quality cast iron. We deliver the highest quality of Pipe Repair Clamp to provide the finest customer experience, without any complaints. We are the subject matter expert having a great reputation in the industry.

• Default Reli Sleeve Clamps are fitted with a tight elastomeric seal which is made from Buna-Nitrole or Viton. The fixing load in these applications is performed by stun tensioning aid studs (split sleeve plane).
• All Reli Sleeve’s Clamps are sorted out with an external weight test office that picks up on the joint tolerability prior to asserting. Similarly, the twin seal program is open to allow seal testing to be carried out during establishment.
• Reli Sleeve Clamps may be required to fix applications outside of and sub-ocean.
• It is possible to make structured game plans to use metal graphite composite seals provided in all Reli Sleeve material.
• Graphite-based fixation guarantees a seal that is misleadingly secured, high temperature, high weight, and won’t ruin in persuasive or extreme conditions.
• Our submitted coordinating gathering will offer a personalized connector course of action.

• ANSI pressure classes 300, 400, 600, 900, and 1500
• The game plan is dependent upon ASME Sec. VIII, API 6H, ANSI B31.4, B31.8, and Split Sleeve Software 3S
• Game plan control and stress appraisal with a confined part gathering
• Body materials: A216 WCB, A216 WCC, A352 LCC, A516 Gr.70 (Suitable for ordinarily harming associations)
• Stud material: A193 Gr. B7 Nut material: A 194 Gr. 2H
• Covering: Yellow Epoxy Polyamide, standard or Marine epoxy
• The most critical bore NBR or VITON elastomer seal obviously incredible with the line liquid and enveloping temperature will be brought into the split sleeves
• NBR temperature expand from – 20 C to + 80 ̊ C̊
• HNBR temperature run from – 20 C to + 150 ̊ C̊
• VITON temperature expand from – 20 C to + 200 ̊ C
• Gaskets are replaceable with no amazing instruments
• Reinforce rings can be made based on customer requirements
• The twofold Row Sealing (DRS) plan is likewise open. This unprecedented course of action is continuously reasonable for where possible spillage is a lot of expensive or risky, for example, vaporous associations and towards the sea applications

• Size: Regular Replacement Clamps: 4’–52 “# 1500 # appropriate for temporary carbon steel.
• Size: Engineered Repair Clamps: 1/2″–52″>2500 # suitable for temporary or permanent installations in carbon steel, stainless steel, and super duplex.

Safety

The clamps are fully compensatory pressure vessels, hydrostatically measured at 1.3 times, with an overall working pressure (as provided for in ASME’s UG-99 Section VIII Div.1)

All Clamps come with a vent port of 1 “NPT

Design Criteria and Industry Standards

All split sleeves shall be tested in keeping in mind the API Specification 6H, “End Closures, Connectors, and Swivels Specifications,” ASME BOILER AND PRESSURE VESSEL CODE, Section VIII; and ANSI Standards B-31.3, B31.4, & B31.8, where appropriate. Credit: Law EN 10204 3.1

Ease of Installation and Maintenance

Both broken sleeves are designed for assembly using the equipment which is mostly available and can be quickly fixed from the field, including full replacement of the seals.

Economy

Pipe Repair Clamp was designed to use state-of-the-art technologies to refine construction methods and components, resulting in a lighter weight, lower bending actions, and more economical.

A split sleeve form is intended for use in the sulfide-bearing hydrocarbon (H2S) process.

With bad quality the body material meets NACE MR0175

We offer Pipe Repair Clamp in every size and configuration according to customer needs.

Inspection of Pipe Repair Clamp

As a standard operating procedure before delivery, each of the Bolted Sleeve Clamps is carefully inspected and checked for any defects. Each shipment is checked and certified scrupulously for safety and durability. Every Pipe Repair Clamp kit is first checked by our company experts before delivering to the clients. Components that do not meet our safety and business standards are immediately turned down and not delivered.

Not Injurious (NDT):

100% Stiffener to Shell Particle Magnetic Testing (MPI)

Swelter (nickname in French)

100% Optical inspection of welded ventilated attachments

Welded character softens at 100% MPI

Hydrotest as provided for in Clause UG-99, Section VIII Div.1 of ASME

Each Pipe Repair Clamp is marked based on the size, width, and consistency of the materials used to produce the Reli Case Pipe Repair Clamp, manufactured in India and beyond.  Reli Sleeve ships its products Pan-India and various countries across the globe.